Price (Inc. Tax): KSh34,800
The DATO DP330 1TB M.2 NVMe SSD (2230) is purpose-built for a new era of high-performance computing, where compactness and speed matter more than ever. With the exponential growth of ultra-portable laptops, handheld gaming consoles, and embedded systems, conventional storage is no longer enough. That’s where the DP330 shines.
Combining the blazing speeds of the PCIe Gen3x4 NVMe interface with the incredibly small M.2 2230 form factor, this SSD transforms the performance of space-limited devices without compromise. Whether you’re upgrading your Steam Deck, Surface device, mini PC, or building an IoT system, the DATO DP330 gives you professional-level responsiveness, storage reliability, and massive capacity — all in a footprint smaller than a stick of gum.
| Feature | Details |
|---|---|
| Model | DATO DP330 |
| Capacity | 1TB |
| Form Factor | M.2 2230 |
| Interface | PCIe Gen3x4 NVMe 1.3 |
| Sequential Read | Up to 2,500 MB/s |
| Sequential Write | Up to 1,700 MB/s |
| NAND Flash Type | 3D TLC NAND |
| Controller | High-efficiency PCIe NVMe Controller |
| Power Consumption | Idle: <0.03W / Active: <2.5W |
| Operating Temp. | 0°C to 70°C |
| Storage Temp. | -45°C to 85°C |
| MTBF | 1.5 million hours |
| Endurance (TBW) | Estimated 600 TBW |
| Warranty | 5 Years Limited Warranty |
Most traditional SSDs are too large to fit inside modern, compact devices like ultraportables, Surface laptops, Steam Decks, or Raspberry Pi enclosures. The M.2 2230 format measures just 22mm wide by 30mm long, making it ideal for ultra-thin laptops, handheld consoles, embedded platforms, and edge computing nodes.
But while the DATO DP330 1TB M.2 NVMe SSD is physically small, its performance is anything but.
With read speeds up to 2,500 MB/s and write speeds of 1,700 MB/s, it’s up to 5x faster than SATA SSDs and up to 25x faster than conventional hard drives. Boot times are nearly instant. Large apps launch within seconds. Files transfer before you can blink.
This drive leverages the NVMe 1.3 protocol over a PCIe Gen3x4 interface to maximize efficiency and minimize latency. NVMe was designed from the ground up for flash storage, offering better queue management and CPU interaction than older SATA-based systems.
What this means for you:
⚡ Snappier system boot-up
⚙️ Faster game level loads and in-game asset streaming
💼 Quicker software compile times and 4K video render output
📁 Large file transfers that complete in seconds, not minutes
With NVMe, every interaction with your device feels smoother, faster, and more fluid.
Built for thin-and-light systems, the DATO DP330 1TB M.2 NVMe SSD consumes incredibly low power. It draws less than 0.03W at idle, helping conserve battery life on portable devices — a crucial factor for mobile professionals and gamers.
Its energy efficiency also means cooler operation, eliminating the need for active cooling. This is ideal for systems where airflow is limited or heat generation must be kept low, such as fanless tablets, industrial sensors, or digital signage players.
DATO DP330 1TB M.2 NVMe SSD ensures durability through high-quality components and solid controller architecture. The 3D TLC NAND flash provides a balance between high endurance and cost-efficiency, capable of handling an estimated 600 TBW (terabytes written).
The drive is rated for 1.5 million hours MTBF, indicating years of reliable use even in high-demand scenarios. Backed by a 5-year limited warranty, it’s a product you can count on.
Installing the DATO DP330 1TB M.2 NVMe SSD is easy, as long as your system supports the M.2 2230 NVMe interface.
Microsoft Surface Laptop / Surface Go / Surface Pro 7–9
Steam Deck handheld gaming console
Intel NUCs
Lenovo ThinkPad X1 Nano / Carbon (check slot length)
Mini PCs with M.2 2230 NVMe bays
Tablets, Chromebooks, and industrial IoT modules
To install, simply remove the back panel, unclip the old drive (if applicable), and insert the DATO DP330 1TB M.2 NVMe SSD into the M.2 slot. Secure with the screw, and you’re good to go. A fresh install of your OS or cloning software may be used.
Level up your Steam Deck or gaming NUC with faster game load times and more room for your titles.
Upgrade ultrabooks for faster booting, faster productivity apps, and more reliability on-the-go.
Embed ultra-compact storage in your robotics platform, NAS, or smart device with high speed and small footprint.
Upgrade hundreds of lightweight laptops in your fleet with easy-install, high-performance drives backed by long warranties.
While not a global household name, DATO is a rising brand in solid-state technology, trusted across emerging markets for performance, reliability, and excellent cost-per-gigabyte value.
The DATO DP330 1TB M.2 NVMe SSD is designed with the same attention to performance, endurance, and compact form factor optimization seen in more expensive counterparts — but at a fraction of the price.
You’re not paying for hype. You’re paying for solid storage that gets the job done.
Radox Technologies — a trusted provider of genuine computing components in Kenya — offers the DATO DP330 1TB M.2 NVMe 2230 SSD with:
✅ Local product availability
✅ Genuine manufacturer-backed warranty
✅ Nairobi showroom and nationwide delivery
✅ Flexible payment options (MPESA, card, bank)
🔗 Buy from Radox Technologies (Local/Internal Link)
Choosing Radox means your upgrade is easy, reliable, and backed by local support. No international shipping delays, no risk of gray market stock.
The DATO DP330 1TB M.2 NVMe SSD (2230) offers incredible value for anyone looking to supercharge a small device. It’s not just about performance — it’s about enabling more possibilities for systems that traditionally couldn’t handle modern workloads.
✅ Super compact
✅ Incredibly fast
✅ Efficient and reliable
✅ Built for the future of computing
Whether you’re building, upgrading, or replacing — this is storage that moves at your pace.
| Feature | Details |
|---|---|
| Model | DATO DP330 |
| Capacity | 1TB |
| Form Factor | M.2 2230 |
| Interface | PCIe Gen3x4 NVMe 1.3 |
| Sequential Read | Up to 2,500 MB/s |
| Sequential Write | Up to 1,700 MB/s |
| NAND Flash Type | 3D TLC NAND |
| Controller | High-efficiency PCIe NVMe Controller |
| Power Consumption | Idle: <0.03W / Active: <2.5W |
| Operating Temp. | 0°C to 70°C |
| Storage Temp. | -45°C to 85°C |
| MTBF | 1.5 million hours |
| Endurance (TBW) | Estimated 600 TBW |
| Warranty | 1 Years Limited Warranty |
Reviews
There are no reviews yet.