Price (Inc. Tax): KSh13,920
Input Voltage Range: 150V – 275V AC
Input Frequency: 50/60Hz ±10% (auto-sensing)
Output Voltage: 220V ±10%
In an increasingly digital world where devices are constantly connected and operational, an uninterruptible power supply (UPS) has become a vital tool. The DAHUA 1200VA UPS (DH-PFM350-720-A) stands out as a compact, line-interactive UPS solution ideal for CCTV systems, home and small office networking devices, point-of-sale (POS) terminals, and low-power desktop setups. Manufactured by Dahua Technology, a global leader in security and surveillance solutions, this UPS is engineered with intelligence, stability, and performance in mind.
The DAHUA 1200VA UPS offers 720W of output power, 4 universal AC output ports, and dual batteries for dependable backup during power outages. Designed to seamlessly integrate with both surveillance and IT infrastructure, this UPS is a strong ally in environments where even a few seconds of downtime could result in lost data, missed surveillance footage, or disrupted workflows.
The DAHUA 1200VA UPS is a line-interactive type UPS, meaning it not only provides battery backup power but also incorporates Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery mode. This conserves battery life and improves efficiency, making the UPS suitable for regions where electricity supply may be unstable or inconsistent.
With a switch-over time of less than 10 milliseconds, the DAHUA 1200VA UPS reacts quickly during a power outage, ensuring your systems remain online without skipping a beat. This is especially crucial in surveillance setups where even brief interruptions can cause data loss or gaps in recorded footage.
Its cold-start capability enables users to power on devices even when utility power is unavailable—useful in blackout scenarios where immediate connectivity or surveillance access is necessary. Meanwhile, LED indicators and audible alarms keep users informed of UPS status, including low battery, overload, or fault conditions.
Model: DH-PFM350-720-A
UPS Type: Line-interactive
Input Voltage Range: 150V – 275V AC
Input Frequency: 50/60Hz ±10% (auto-sensing)
Output Voltage: 220V ±10%
Output Frequency: 50/60Hz ±1Hz
Rated Capacity: 1200VA / 720W
Effective Battery Output Power: Up to 530W on battery mode
Transfer Time: ≤10ms (typical)
Waveform Type (Battery Mode): Modified sine wave
Waveform Type (Mains Mode): Pure sine wave pass-through
Battery Type: 2 × 12V 7Ah sealed lead-acid (SLA) batteries
Battery Recharge Time: 90% recharge in approximately 6 hours
Number of Output Ports: 4 × Universal AC Output Sockets
Input Plug Type: European standard with 1-meter cable
LED Indicators: Green (mains), Yellow (charging), Red (battery/backup), Flash codes for different statuses
Audible Alarms:
Battery Mode: Beep every 6 seconds
Low Battery: Beep every 1 second
Overload: Beep every 0.5 seconds
Fault: Continuous beep
Surge Protection: Yes
Overload Protection: Yes
Short Circuit Protection: Yes
Cold Start Capability: Yes
Working Temperature: 0 – 40°C
Humidity: 0 – 90% (non-condensing)
Dimensions (L × W × H): 312mm × 122mm × 195mm
Net Weight: 8.4 kg
Certifications: CE Certified
The 720W output power makes this DAHUA 1200VA UPS suitable for supporting multiple critical devices during a power outage. Whether it’s a set of CCTV cameras and DVRs, a router/modem combination, or a POS system, this UPS provides reliable uptime to ensure operational continuity.
For example:
Routers and modems (~50W): Up to 60 minutes runtime
DVR/NVR systems (~100W–150W): 20 to 30 minutes runtime
POS terminal + thermal printer (~120W): 25 minutes runtime
Entry-level desktop PC + monitor (~250W): 10 to 15 minutes runtime
These estimates make the unit ideal for short power interruptions or controlled shutdowns in longer outages.
Security systems are a key use case for this DAHUA 1200VA UPS model. Sudden power loss can lead to:
Missed surveillance footage
Damaged video files
Unresponsive IP cameras or DVRs
Delayed motion alert delivery due to offline routers
This is why the DAHUA 1200VA UPS was engineered with four output ports, enabling simultaneous support for a DVR/NVR, router, switch, and another device (like a camera controller or monitor). The pure sine wave pass-through in mains mode helps avoid issues with sensitive power supplies in surveillance gear.
Equipped with two 12V 7Ah batteries, this DAHUA 1200VA UPS stores more energy compared to single-battery systems. This means extended runtime and greater stability during power outages. The system is also designed for efficient recharging, reaching 90% battery capacity in about 6 hours, so it’s ready to protect again after each use.
The sealed lead-acid batteries are replaceable, allowing you to extend the overall lifespan of the UPS for years with minimal maintenance.
The DAHUA 1200VA UPS includes multiple layers of protection to ensure connected devices are safe:
Surge Protection: Safeguards devices from power spikes
Overload Protection: Prevents overdraw by cutting off power during excessive loads
Short Circuit Protection: Quickly shuts off output to prevent damage to UPS or connected devices
Deep Discharge Protection: Protects the battery from being drained beyond safe levels
These protections not only enhance device safety but also improve battery longevity and reduce maintenance.
The built-in LED indicators and audible alarms provide real-time information about the DAHUA 1200VA UPS operating state:
Green: Normal operation
Yellow: Battery charging
Red: Battery in use
Flashing LEDs & Beep Codes: Help diagnose specific issues quickly (e.g., overload, low battery)
This easy-to-understand feedback system is great for non-technical users who need to respond quickly during outages.
Here are some real-world scenarios where the DAHUA 1200VA UPS can be a valuable asset:
Protect your work-from-home setup, including your Wi-Fi router, desktop PC, monitor, and VoIP phone system. This UPS ensures you can save files, complete video calls, and shut down gracefully.
Keep your POS systems, printers, and networking hardware operational during blackouts. It ensures transactions, communication, and services can continue temporarily.
Power up your CCTV surveillance, billing system, and barcode scanners all from one unit. If power fails, you’ll still capture video footage and complete sales.
CCTV systems need power 24/7. Use this DAHUA 1200VA UPS to protect your DVR/NVR, routers, switches, and IP cameras during blackouts, ensuring your security system never goes offline.
Line-interactive design for intelligent power management
Dual-battery backup for extended runtime
4 universal output ports for multiple device connections
Cold-start function for blackout conditions
LED + audio indicators for clear status updates
Compact form factor for easy placement
Automatic Voltage Regulation (AVR) to stabilize fluctuating voltage
Replaceable batteries for long-term value
No USB/serial port: Cannot auto-shutdown computers via software
Modified sine wave output on battery: May not suit sensitive high-end power supplies
Audible alarms are not adjustable: May be disruptive in silent environments
Short runtime for high-load devices: Backup limited for PCs above 500W
Lead-acid batteries require maintenance: Replacement typically every 2–3 years
The DAHUA 1200VA UPS (DH-PFM350-720-A) is a smart investment for anyone looking to maintain continuity and protect electronics in the event of power instability. It’s well-suited for surveillance systems, network devices, POS terminals, and home/office environments where reliable uptime matters.
While it doesn’t have network management features or pure sine output on battery, it offers a compelling mix of efficiency, capacity, and affordability. Whether you’re a tech-savvy installer or a small business owner, this UPS can be the backbone of your power protection strategy.
Model: DH-PFM350-720-A
UPS Type: Line-interactive
Input Voltage Range: 150V – 275V AC
Input Frequency: 50/60Hz ±10% (auto-sensing)
Output Voltage: 220V ±10%
Output Frequency: 50/60Hz ±1Hz
Rated Capacity: 1200VA / 720W
Effective Battery Output Power: Up to 530W on battery mode
Transfer Time: ≤10ms (typical)
Waveform Type (Battery Mode): Modified sine wave
Waveform Type (Mains Mode): Pure sine wave pass-through
Battery Type: 2 × 12V 7Ah sealed lead-acid (SLA) batteries
Battery Recharge Time: 90% recharge in approximately 6 hours
Number of Output Ports: 4 × Universal AC Output Sockets
Input Plug Type: European standard with 1-meter cable
LED Indicators: Green (mains), Yellow (charging), Red (battery/backup), Flash codes for different statuses
Audible Alarms:
Battery Mode: Beep every 6 seconds
Low Battery: Beep every 1 second
Overload: Beep every 0.5 seconds
Fault: Continuous beep
Surge Protection: Yes
Overload Protection: Yes
Short Circuit Protection: Yes
Cold Start Capability: Yes
Working Temperature: 0 – 40°C
Humidity: 0 – 90% (non-condensing)
Dimensions (L × W × H): 312mm × 122mm × 195mm
Net Weight: 8.4 kg
Certifications: CE Certified
Reviews
There are no reviews yet.